page_banner

Valve

  • Servo valve SM4-40(40)151-80/40-10-H919H

    Servo valve SM4-40(40)151-80/40-10-H919H

    Servo valve SM4-40(40)151-80/40-10-H919H is widely used in electro-hydraulic position, velocity, acceleration, force servo systems, and servo vibration generators. It has the advantages of small size, compact structure, high power amplification coefficient, high control accuracy, good linearity, small dead zone, high sensitivity, good dynamic performance, and fast response speed.
  • Steam turbine Servo Valve J761-003A

    Steam turbine Servo Valve J761-003A

    The servo valve J761-003A is also an excellent equipment servo valve, suitable for electro-hydraulic position, speed, pressure or force control systems that require high dynamic response, providing guarantees for the safe and efficient operation of the system.
  • Sealing Oil Vacuum Oil Tank Float Valve BYF-80

    Sealing Oil Vacuum Oil Tank Float Valve BYF-80

    This sealing oil vacuum oil tank float valve BYF-80 uses mechanical ball-float liquid-level controller. It uses automatic oil tank or other containers to supply the oil, so that the oil tank is kept within the liquid-level range. It is mainly used in the single-circuit oil sealing control system vacuum oil-tank of the hydrogen cooling turbo-generator for liquid-level control. It also can be used in the oil-tank supply or the water-tank supply.
    Brand: YOYIK
  • AST solenoid valve SV13-12V-0-0-00

    AST solenoid valve SV13-12V-0-0-00

    AST solenoid valve SV13-12V-0-0-00 is a 2-way, 2-position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve.
  • Servo valve SV4-20(15)57-80/40-10-S451

    Servo valve SV4-20(15)57-80/40-10-S451

    Servo valve SV4-20 (15) 57-80/40-10-S451 outputs modulated flow and pressure after receiving electrical analog signals. It is not only an electro-hydraulic conversion component, but also a power amplifier component. It can convert small and weak electrical input signals into high-power hydraulic energy (flow and pressure) output. In an electro-hydraulic servo system, it connects the electrical and hydraulic parts to achieve the conversion of electro-hydraulic signals and hydraulic amplification. The electro-hydraulic servo valve is the core of the control of the electro-hydraulic servo system.
  • Hydraulic Pressure Control Valve PCV-03/0560

    Hydraulic Pressure Control Valve PCV-03/0560

    The Hydraulic Pressure Control Valve PCV-03/0560 is an electro-hydraulic proportional valve designed to regulate the pressure in the hydraulic system in proportion to the added electrical input. It can be used to directly control the pressure in small flow systems, or for pilot control of larger pressure control valves, or for purposes such as pressure control pumps. Before leaving the factory, setting adjustments have been made to ensure high reproducibility between valves. The valve design has a small hysteresis loop and good repeatability. The valve body sealing material is compatible with mineral liquids such as L-HM and L-HFD.
    Brand: YOYIK
  • Bellows relief valve BXF-40

    Bellows relief valve BXF-40

    The bellows relief valve BXF-40, also known as a pressure reducing valve or differential pressure valve, is composed of a valve body, valve cover, valve seat, valve stem, diaphragm, diaphragm pressure plate, spring, etc. The working medium temperature is 0 to 90 ℃, and the working pressure difference is between 1.0 to 2.5MPA. The main material is cast steel, with flange connection.
    Brand: YOYIK
  • Three valve manifold HM451U3331211

    Three valve manifold HM451U3331211

    The Three valve manifold HM451U3331211 is an integrated three valve group. All possible primary and secondary valves for the automation process industry. The three valve group consists of three interconnected three valves. The role of each valve in the system can be divided into: high-pressure valve on the left, low-pressure valve on the right, and balance valve in the middle.
  • AST solenoid valve Z2805013

    AST solenoid valve Z2805013

    The AST solenoid valve Z2805013 belongs to the ETS actuator and is installed on the integrated block. It is mainly used to execute signals sent by superiors and receive tasks. Control the direction of hydraulic flow, solenoid valve Z2805013 is used for the emergency trip control block of the ETS system in the power plant. ETS is a protective device for the emergency trip system of the steam turbine, which receives alarm or shutdown signals from the TSI system or other systems of the steam turbine generator set, performs logical processing, and outputs indicator light alarm signals or steam turbine trip signals.
  • Stainless steel globe throttle check valve LJC series

    Stainless steel globe throttle check valve LJC series

    Stainless steel globe throttle check valve LJC series is a valve that has both stop valve and check valve functions. Its valve stem is not fixedly connected to the valve disc. When the valve stem descends, the valve disc will tightly press against the valve seat, acting as a shut-off valve; When the valve stem rises, it acts as a check valve. On pipelines that require the installation of both globe and check valves or in locations with limited installation locations, the use of globe and check valves can save installation costs and space. Suitable for pipelines with media such as steam, flammable, explosive, heat transfer oil, high-purity, toxic, etc.
    Brand: YOYIK
  • EH oil system globe valve SHV20

    EH oil system globe valve SHV20

    The EH oil system globe valve SHV20 is used in the EH oil system of thermal power plants and is installed on the integrated block of the energy accumulator. It is suitable for full opening or full closing and does not have the function of regulation and throttling. The EH oil system belongs to a high-pressure system, with high fluid resistance and high force required for opening and closing. It can be operated with specialized tools. Its material selection is stainless steel, corrosion-resistant, and externally threaded connection.
    Brand: YOYIK
  • Generator hydrogen cooling system safety valve 5.7A25

    Generator hydrogen cooling system safety valve 5.7A25

    The generator hydrogen cooling system safety valve 5.7A25, also known as a relief valve, is a device driven by medium pressure. According to different occasions, it can be used as both a safety valve and a pressure relief valve. The safety valve 5.7A25 is driven by the static pressure of the medium in front of the valve. When the pressure exceeds the opening force, it opens proportionally. It’s mainly used in fluid applications.
    Brand: YOYIK
1234 Next > >> Page 1 / 4